Transport; Unloading - Jung JKB 1,5 Instrucciones De Servicio

Dispositivos rotativos y servo-dispositivos de transporte
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 52

4.4.2 Transport

NOTE
Transport may only be carried out on a level, clean and
load-bearing surface. If you use a towing vehicle, do
not exceed the permissible trailing load and observe
the maximum braking force of the towing vehicle. Do
not exceed the transport speed of 2 km/h.
WARNING
Do not move on a pitch or descent and only use a
suitable towing vehicle.
WARNING
Do not exceed the permissible unbraked trailer load.
> Clean the transport path before transporting and
clear away any loose objects.
> Move the transport trolley by hand or by means of a
towing vehicle to the desired location.
DANGER
Never lift the load to be lifted on one side up to the
ground clearance since there is a big risk of tilting and
slipping if this is done.
WARNING
Slowly and carefully lower the transport load onto the
trolley. There is risk of tipping and sliding
WARNING
It is imperative that the revolving transport trolleys
also be steered at the rear side of the load, since the
transported load can break out as a result of uneven
floors.
- 48 -
JKB revolving transport trolleys / JLF multi-purpose trolleys

4.4.3 Unloading

> Secure the rear trolley with wedges.
> Raise the front edge of the transport load and
remove the steering gear.
> Place supports under the front edge and carefully
lower.
> Raise the rear edge of the transport load and remove
both trolleys.
> Slowly and carefully lower the rear and front edges
alternatingly.
To lower a load, perform the steps in the
"Loading the trolleys" chapter, page 47,
in reverse order.
© JUNG Hebe- und Transporttechnik GmbH

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Jkb 3Jkb 4Jkb 6Jkb 7,5Jkb 10Jkb 3,5 ... Mostrar todo

Tabla de contenido