Further Information On The Mechanical Model Timer Program; Program Finish On The Mechanical Model - NEW POL eXperience XS 251 CO Manual Del Usuario

Fabric
Synthetics
Delicates
Mixed
NOTEThe duration of the drying cycle depends on: the weight, dimensions, fabric type and degree of damp-
ness. In order to prevent the fabrics from creasing, never overload the drier.
A 1. Close the door securely.
2. Make sure that the ON/
OFF button is OFF.
3. Insert the plug in the
mains socket.
B 1. Position the programmer
on the STOP prior to the
selected program.
FURTHER INFORMATION ON THE TIMED PROGRAM (MECHANICAL MODEL)
The timed program is divided
into two sections:
energetic program sec-
tion (Cotton/Linen)
delicate program section
(synthetics); followed au-
tomatically by a cooling
cycle.
The program can be
shortened by rotating the
programmer knob in the
direction of the STOP. The
required drying time de-
pends on:
END OF PROGRAM MECHANICAL MODEL
At the end of each program, the
drier effects a cooling cycle of
approximately 10 minutes.
SM1733
USING THE APPLIANCE
USING THE MECHANICAL MODEL
Weight of dry Dry button
washing
DELICATE PROGRAM SECTION
1,5 kg
2,0 kg
2. Press the ON/OFF but-
ton to switch on the drier.
(The indicator light will
light up).
3. Position the programmer
on the required program.
(See program table) (the
indicator light lights up).
weight and dimensions of
the washing
type of fabric
degree of drying required
degree of dampness of
the washing.
(It is recommended that
an appliance of spin
speed of at least 800/
1000 or a separate spin
drier is used).
NOTE
Cotton/Linen for example un-
WARNING: Before removing
the washing from the drum,
press the ON/OFF button, ro-
Times in minutes
Wardrobe Iron dry
dry
50-80 min.
40-60 min.
4 To start the program, press
the "START" button.
N.B. For safety reasons, the
cycle is interrupted automati-
cally if the door is opened. To
continue the cycle, re-press
the START button.
derwear, handkerchiefs, table-
cloths, sheets.
SYNTHETICS:
for example, underwear, nylon,
dralon, terlenkja, etc.
CHANGING THE PROGRAM
To change the program, rotate
the programmer knob to STOP.
Set the new program (see Us-
ing the drier).
tate the programmer knob to
STOP and then remove the
dry washing from the drum.
GB
Slightly
damp
23