Heath Zenith SL-6143 Manual De Instalación página 3

• Ding (one note tune)
Push Button: Add a jumper to location 8.
• Ding-Dong (two note tune)
Push Button: Remove jumper from location 8.
Chime: Remove jumper from location 8.
• Westminster (Eight note tune) (Available on selected Heath
chimes)
Push Button: Remove jumper from location 8.
Chime: Add a jumper to location 8.
Note: All models have both front and back door tune capabilities. You
may purchase any Heath
entrance. We recommend the back door use the Ding tune and the
front door use the Ding-Dong tune (or Westminster tune, available
on selected Heath
tons will come factory set for front and back doors. Decals on the rear
of the push button will indicate its setting.
Remove screw to
open access door
Back of
Chime
Tune Setting
(Not used on
all models)
595-5649-06
/Zenith wireless push button for a second
®
/Zenith chimes). Models that include two push but-
®
Push Button Battery Replacement
Install an alkaline type A23 12 Volt bat-
tery. See diagram inside push button for
correct battery orientation.
Inside Push
Button
Note: Some models might require the use of
tweezers to remove and replace the jumpers.
* Code Settings 1-7 Must
Match Both Push Button
Tune Setting
-3-
/Zenith
®
and Chime