Features And Controls; Top Panel - TEAC PROFESSIONAL TASCAM X-15 Manual Del Usuario

Features and controls

Features and controls

Top Panel

1
MAIN MIC input
Connect the main microphone to this XLR/TRS
connector that can accept both balanced and unbalanced
signals.
This is a "combo" type jack which accepts both XLR
type and 1/4" TRS type connectors.
Connections are as follows:
XLR
GND: Pin 1
HOT: Pin 2
COLD: Pin 3
NOTE
There is another MAIN MIC input connector on the
rear panel. Only use either the connector on the
rear panel or the top panel (you cannot use both at
the same time).
2
ON switch and indicator for MAIN MIC
channel
Push for on, and push again for off. When this switch is
on, the MAIN MIC channel is active and the indicator
lights.
TRS
Sleeve
Tip
Ring
3
MAIN MIC LEVEL
Adjusts the signal level of both the top and rear MAIN
MIC inputs.
NOTE
All input adjustments must be done very carefully.
Use the level meters and/or headphones for
reference. Make sure that the top red meter LEDs
do not all light up, as this shows that the signal can
clip (overload and distort).
4
MIC EQ
2-band EQ (HI and LO, both cutting and boosting by 12
dB) affecting both the the MAIN MIC and AUX MIC
input signals.
5
ON switch and indicator for AUX MIC channel
Push for on, and push again for off. When this switch is
on, the AUX MIC (auxiliary microphone) channel is
active and the indicator lights.
6
AUX MIC LEVEL
Adjusts the signal level of the AUX MIC input.
English
5
TASCAM X-15