Toshiba RAS-M10SMUV-E Manual De Instalación página 22

8
APPLICABLE CONTROLS
To improve Cooling/Heating effect
When only poor cooling/heating effect is obtained due to installation place of the indoor unit or construction of the
room, the detection temperature of cooling/heating can be changed.
• Remove the cover of the electric parts box by taking off the mounting screws (3 positions) and pushing the
hooking section. (The cover of the electric parts box remains hanged to the hinge.)
• There are the selector switches (SW01) on the P.C. board of the electric parts box.
The setting of the detection temperature can be changed by combining No.1 to No.4 switches of the selector
switches (SW01). Adjust the setting of the detection temperature according to the right table.
Setting at shipment
No.1 No.2 No.3 No.4
OFF OFF OFF OFF
ON OFF OFF OFF
OFF ON OFF OFF
ON ON OFF OFF
OFF OFF ON OFF
ON OFF ON OFF
OFF ON ON OFF
ON ON ON OFF
OFF OFF OFF ON
ON OFF OFF ON
OFF ON OFF ON
ON ON OFF ON
OFF OFF ON ON
ON OFF ON ON
OFF ON ON ON
ON ON ON ON
19
COOL/DRY HEAT
(°C) (°C)
–2 –2
–2 +4
–2 +2
–2 0
+4 –2
+4 +4
+4 +2
+4 0
+2 –2
+2 +4
+2 +2
+2 0
0 –2
0 +4
0 +2
← Factory setting
0 0
ON
6H
SW01
1 2 3 4
TS ADJUST
ON
ON
6H
SW02