CESVA MI006 Manual Del Usuario página 33

3) Pass the screw with a washer through the hole of the base of the MI006 from
its underside. Fasten the screw with the other washer, lock washer and nut.
See the picture below.
4) Finally connect the cable of the battery support to the "CAD BAT" connector
of the MI006 main board (see images above). The connector should fit
perfectly, if not, check the position and orientation of the connector.
5) Place and screw the cover of the MI006.
Chapter 6 Connecting the optional battery MB006
Nut
Lock washer
Washer
MB006 support
MI006
Washer
Screw head
31