Bissell POWERTRAK 1808 Serie Guia Del Usuario página 9

Maintenance: Check Brush & Belt
In Step 1 and 5, you will need a Phillips
screwdriver.
1
Unplug vacuum, turn
over and unscrew 5 Silver
Phillips head screws and
remove bottom cover.
4
Place belt back on motor gear. Pull belt over the
brush roll and place back in. Position the brush roll
end opposite of the belt to line up with tab. The
end closest to the belt will slide in the tab without
needing any rotation.
2
Pull brush roll straight out
and slide belt off.
3
Inspect brush roll by placing
it on its end and spin. The
brush roll should spin freely,
multiple times by one flick.
If it doesn't, replace brush
roll. Inspect belt, replace if
it appears damaged.
5
Re-attach bottom replacing
the 5 screws. Spin the brush
by hand one revolution to
self-center the belt.
www.BISSELL.com
9