Product Description - Stobag MOVENO DSRCE-V Instrucciones Y Advertencias Para La Instalación Y El Uso

Safety measures and warnings:
The present manual contains important safety instructions for
the INSTALLATION and USE of the product.
INSTALLATION:
Incorrect installation could cause serious injury. For this
reason, all installation instructions contained in the present
manual should be carefully followed during the working oper-
ations.
PRODUCT USE:
For the safety of persons, it is very important to follow
these instructions carefully in the everyday use of the prod-
uct. Keep this manual in a safe place for future reference.
The MOVENO DSRCE-V series motors, version MOVENO-U Ø35mm,
have been designed for the automation of rolling shutters and awnings;
any other use is considered improper and is prohibited. These motors
are intended for residential use. Maximum continuous operating time is
4 minutes. When selecting the motor based on the application require-
ments, the nominal torque and operating time shown in the rating plate
must be considered. The minimum diameter of the tube on which the
motor can be installed is 40mm for MOVENO-U. The motor must be
installed by qualified technicians in compliance with current safety regula-
tions. All unnecessary electrical cables must be removed before installa-
tion; all mechanisms not required for motorized operation must be disa-
bled. If the motor is installed at a height below 2.5m, all moving parts of
the motor must be protected. For awning applications, the horizontal
clearance between the fully open awning and any stationary object must
be at least 0.4m.

1) Product description

The MOVENO DSRCE-V series motors, version MOVENO-U Ø35mm,
are electric motors equipped with RPM reduction and terminating at
one end with a shaft on which the driving wheels can be mounted;
see figure 2. The motor must be fitted inside the winding tube, where
it can raise or lower the roller shutter or awning.
The control unit incorporated in the motor also has a high precision
electronic limit switch system that can constantly detect the position
of the rolling shutter.
The movement limits, roller shutter or awning open and roller shutter
or awning closed (as well as intermediate positions), can be pro-
grammed and the awning automatically stops when these positions
are reached.
The MOVENO DSRCE-V series motors incorporate a radio receiver
operating at a frequency of 433.92 MHz, with rolling code technology
that guarantees high levels of security. It is possible to memorize up
to 14 transmitters for each motor in the SKIMY series; see figure 3;
that allow the remote control of the motors, or 3 wind and sun radio
sensors "SKIROSOL 610" which control the motor depending on the
weather conditions.
The programming of the limit switches and additional functions can
be done directly from the transmitters, with beeps that sound to
guide users through the various phases. It is also possible to control
the motors via an external button (using the Step-by-Step function)
or "TTBUS" Bus.
26
The PVC power supply cable supplied with MOVENO DSRCE-V motors
is ideal for external installation. The tubular motor must not be subjected
to crushing, impacts, falls or contact with any kind of liquid. Do not per-
forate or drive screws into any part of the tubular motor; see figure 1.
The control switch must be fixed in an easily visible location but away
from moving parts and at a height no less than 1.5m. Do not modify any
components unless such action is specified in these instructions. Opera-
tions of this kind are likely to lead to malfunctions. STOBAG disclaims any
liability for damage resulting from modified products. For maintenance
and repairs contact a qualified technician.
When the roller shutter or awning is in movement, make sure that there
are no persons within the movement range. Do not activate the awning if
work is being carried out close by, for example: window cleaning; in case
of automatic control, disconnect the power supply as well. Do not let
children play with the fixed control device and keep the remote controls
out of their reach. Check the balancing springs (if any) and the wear of
cables at frequent intervals.
If the slope of the awning is less than 25% or less than the
value recommended by the manufacturer it should be retract-
ed to avoid water pockets when it rains.
The rolling shutter could be damaged if used when ice has
formed.
Some of the programming phases can use the mechanical
stops of the roller shutter (caps and/or burglar-proof springs).
In this case it is necessary to select a motor with a torque that
is suitable for the application taking into consideration the
effective stress and avoiding excessively powerful motors.
www.stobag.com