Symbol VRC 394 Serie Guía Rápida página 15

Problem Explanation/Action
Battery is dead Battery not replaced after receiving low battery
message or terminal left on for more than 24
hours. Replace the battery.
Note: Terminal loses software when power is lost.
To reload software, cold boot terminal and enter
NetID manually. Associate with AP and
reacquire boot files as described in Initiate
Network Connection.
Terminal Application does not respond to interactive
disassociated operations. Applications using internal batch
from Access Point mode continue to function until required to
transmit via radio, then fail to work. No message
displayed.
Contact administrator.
Terminal does not Master switch is off. Turn on master switch.
power on
OR
Vehicle battery is dead. Recharge or replace the
vehicle battery as soon as possible.
OR
The fuse is blown. Replace the fuse (p/n 51091-
26-00). If the fuse continues to fail, send the
terminal for repair.
Scanner does not Bar codes are not legible. Scan another label or
operate enter data manually.
Low NiCd NiCd backup battery is low. Keep main power to
unit on for at least 24 hours to recharge NiCd
battery.
13