Winter Operation - Stihl FS 460 C-M Manual De Instrucciones

M-Tronic
General Information
The M-Tronic controls fuel feed and
ignition timing electronically in all
operating conditions.
M-Tronic ensures simple, fast starts,
optimum engine power at all times, very
good acceleration and automatic
adjustment to suit changing conditions.
For this reason there is no need to
change the carburetor setting – the
carburetor has no adjusting screws.
If the usual good running behavior and
engine power are not reached after an
extreme change in operating conditions,
contact your servicing dealer for
assistance.
STIHL recommends that you have
servicing and repair work carried out
exclusively by an authorized STIHL
servicing dealer.
FS 460 C-M, FS 460 C-M L

Winter Operation

At temperatures below
+50 °F (+10 °C)
Pre-heat carburetor
Moving a shutter causes heated air to be
drawn in from around the cylinder and
mixed with cold air in order to prevent
carburetor icing.
2
1
An arrow on the shroud (1) shows the
position of the shutter (2) for summer or
winter operation. Key to symbols:
– Symbol "Sun" = summer operation
– Symbol "Snowflake" = winter
operation
3
2
N Unscrew and remove screw (3) on
shutter
N Remove shutter (2) from the shroud
N
Rotate shutter (2) from summer
position to winter position and
reinsert
N Screw the screw (3) through the
shutter into the shroud
At temperatures between
+50 °F (+10 °C) and +70 °F (+20 °C)
Within this temperature range, the
machine can normally be operated with
the shutter (2) in summer position.
Change the position of the shutter as
necessary.
English
31