Maintenance/Cleaning - Leica RANGEMASTER CRF 1200 Instrucciones

Ocultar thumbs Ver también para RANGEMASTER CRF 1200:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 65

Maintenance/cleaning

Your Leica Rangemaster CRF does not require
special care. Any large dirt particles, such as
sand, should be removed with a soft brush or be
blown off. Fingerprints etc. on the lens or eye-
piece can be can be cleaned off the lenses by
first moistening them with a damp cloth and
then wiping with a soft, clean chamois leather or
lint-free cloth.
Important:
Do not exert excessive pressure when wiping
heavily soiled lens surfaces. Although the
coating is highly resistant to abrasion, sand or
salt crystals can still damage it.
The housing should be cleaned only with a damp
leather. Using dry cloths can lead to an elec-
trostatic build-up. Alcohol and other chemical
solvents must not be used to clean the optics or
the housing. As well as its type designation, each
Leica Rangemaster CRF has its "personal" serial
number. Make a note of this number in your
documents for security.
Attention:
Do not open the main body under any
circumstance!
Spare parts
If you should require any spare parts for your
Leica Rangemaster CRF, e.g. eyepiece cup or
carrying cord, please contact our Customer
Service department (address, see p. 22) or the
Leica distributor in your country (see Warranty
Card for addresses).
19

Publicidad

Tabla de contenido
loading

Tabla de contenido