Important; Charge Indications - Philips HQ673/17 Manual Del Usuario

ENGLISH
4
C
C
C

Important

Only use the HQ8000/ 600 powerplug
supplied to charge the shaver.
The powerplug transforms 100-240 volts to
12 volts.
Make sure the HQ8000/ 600 powerplug does
not get wet.
The shaver runs at a safe low voltage of
12 volts. It is watertight and can be cleaned
under the tap. Do not rinse with water hotter
than 80cC.
For the best shaving results, shaving emulsion
should be pumped up frequently.

Charge indications

As soon as you start charging the empty
shaver, the green pilot light will go on.
When the batteries are running low, the pilot
light turns red.
The pilot light will blink red for a few seconds
after the shaver has been switched off.
Charging
Recharge and keep the appliance at a
temperature between 5cC and 35cC.
The powerplug is suitable for mains voltages
ranging from 100 to 240V.
You cannot use the shaver when it is charging,
because the appliance does not work while its
batteries are being charged.