Briggs & Stratton SNAPPER XD SXD21SSWM82 Manual Del Propietário página 14

ASSEMBLY
INSTALLING THE GRASS CATCHER BAG (See Figure 4)
• Lift the rear cover (1).
• Lift the grass catcher by its handle (2) and place under the rear cover so
that the hooks (3) on the grass catcher (4) are seated on the door rod (5).
• Release the rear cover. When installed correctly, the hooks on the grass
catcher will extend through the openings on the rear cover.
NOTE: When using the grass catcher, do not install either the side discharge
deflector or the mulching plug.
(3)
(2)
(1)
(5)
(3)
(4)
14
Fig. 4