MSA Cairns 880 Instrucciones De Instalación página 5

(5) To install the chin strap so the closure is on the right, do
the following:
a) Put the section of the chin strap with the QRB
b) Connect both snaps. Make sure that the snaps are
c) With the section of the chin strap with the Postman's
Note:
(6) To make sure that installation is correct, hold the helmet
by the chin strap. Make sure that all parts of the chin
strap stay connected.
(7) Don the helmet.
(8) Adjust the chin strap to the correct fit.
MSA Cairns Helmets - Chin Strap Replacement Kits
through the outside of the bracket on the left side of
the helmet.
closed tightly and the snap covers point outward,
away from your skin.
buckle, do steps a) and b) on the right side of the
helmet.
To install the chin strap so the closure is on the left,
install the chin strap with the QRB on the right side of
the helmet and the chin strap with the Postman's
buckle on the left side of the helmet.
Installation
US
5