Unpacking Your Fan; Parts Inventory; Installation Preparation. Pgs - Craftmade PUH52 Guia De Instalacion

1. Unpacking Your Fan.

Carefully open the packaging. Remove items
from Styrofoam inserts. Remove motor housing
and place on carpet or Styrofoam to avoid
damage to finish. Do not discard fan carton or
Styrofoam inserts should this fan need to be
returned for repairs.
Check against parts inventory that all parts have
been included.

2. Parts Inventory.

PLEASE NOTE: Drawings in manual are representative only.
IMPORTANT REMINDER: You must use the parts provided with this fan for proper installation and safety.
3. Installation Preparation.
To prevent personal injury and damage, ensure
that the hanging location allows the blades a
clearance of 7ft. (2.13m) from the floor and 30in.
(76cm) from any wall or obstruction.
This fan is suitable for room sizes up to
400 square feet (37.2 square meters).
a. hanging bracket. 1 piece
b. motor housing. 1 piece
c. motor assembly. 1 piece
d. blade arm. 5 pieces
e. blade. 5 pieces
f. hardware packs
a
c
e
f
blade edge
30
inches
7 feet (76cm)
(2.13m)
page 2
b
d
10ft. - 12ft.
(3.05m - 3.66m)