Move Refrigerator Into Frame; Install Door Panels - Kitchen Aid KBBX104E Instrucciones De Instalación

Move Refrigerator Into Frame

1. Attach the hinge caps, two on the refrigerator door and two
on the freezer door.
2. Place the gasket on the side of the unit opposite the hinges.
3. Move the refrigerator into the frame.
4. Use a Phillips screwdriver and two 13 mm screws (one for
each side) to attach the brackets at the top of the unit to the
underside of the top of the frame.
5. Use the cabinet alignment tool to make sure that the
refrigerator is pushed into the frame to the proper distance
13 / " (46 mm).
13
16
6. Use a Phillips screwdriver and two 25 mm screws (one for
each side) to attach the brackets at the base of the unit to the
floor of the frame.
7. Use a Phillips screwdriver and four 13 mm screws (one for
each hinge) to attach the hinges to the side of the frame.
/
1 13 " min.
16
(46 mm)

Install Door Panels

6
Door Panels Requirements (each door)
Max Weight: 26.5 lbs (12 Kg)
Minimum Panels Dimensions:
Refrigerator Door Panel: 42
1
x 3/4" (20 mm)
Freezer Door Panel: 27 ⁄ " (701.5 mm) x 23¼" (590 mm) x
5
8
3/4" (20 mm).
For maximum dimensions, please review the following diagram.
Width 600 mm (23.5 inch)
B = max. 594
Cabinet frame wall thickness 16 mm
min. R1
[mm]
594
16 0
17 0
18 0
19 0
A
20 0
[mm]
21 0.4
22 2.6
23 5
24 7.5
How to read this diagram:
For example if the door panel width dimension "B" is 593 mm
and thickness of door panel dimension "A" is 22 mm that means
that door panel require radius "R1" min 2 mm.
⁄ " (1071.5 mm) x 23¼" (590 mm)
8
Montage Position
1
X
Detail view X
B [mm]
593 592 591
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
2 1.3 0.7
4.4 3.8 3.2
7 6.5 6
R
2
590
0
0
0
0
0
0
0
2.6
5.5