Ec Declaration Of Conformity; Technical Data - EUCHNER GS Serie Instrucciones De Operación

Operating Instructions
Precision Multiple Limit Switches GS...C1806 12 mm
Exclusion of liability and warranty
In case of failure to comply with the conditions for
correct use stated above, or if the safety instruc-
tions are not followed, or if any servicing is not
performed as required, liability will be excluded and
the warranty void.

EC declaration of conformity

The manufacturer named below herewith declares
that the product fulfills the provisions of the direc-
tive(s) listed below and that the related standards
have been applied.
EUCHNER GmbH + Co. KG
Kohlhammerstr. 16
D-70771 Leinfelden-Echterdingen
Directives applied:
Machinery directive 2006/42/EC
f
Standards applied:
EN 60947-5-1:2004 + Cor.:2005 + A1:2009
f
EN 14119:2013
f
The original EC declaration of conformity can also
be found at: www.euchner.de
Service
If service support is required, please contact:
EUCHNER GmbH + Co. KG
Kohlhammerstraße 16
D-70771 Leinfelden-Echterdingen
Service telephone:
+49 711 7597-500
Fax:
+49 711 753316
E-mail:
support@euchner.de
Internet:
www.euchner.de

Technical data

Parameter
Housing material Die-cast aluminum, anodized
Plunger material Stainless steel
Degree of protection
IP 67
acc. to IEC 60529
Mech. operating cycles ES502E/ES508E
Switching frequency ES502E
ES508E
Ambient temperature -5 ... +80°C
Installation position Any
Max. approach speed
Plunger Chisel D 40 m/min
Roller R (slide bearing) 80 m/min
Roller B (ball bearing) 120 m/min
Dome W/ball K 10 m/min
Min. approach speed 0.01 m/min
Actuating force ES502E
with switching element ES508E
Switching element
ES502E 1 NO contact + 1 NC contact
ES508E 1 positively driven NC contact
Switching principle
ES502E Snap-action switching contact
ES508E Slow-action switching contact
Hysteresis ES502E
Contact material
ES502E/ES508E Silver alloy, gold flashed
Connection Screw terminals
Tightening torque of screw terminal
ES502E/ES508E
0.5 Nm
(cross-head screw)
Conductor cross-section (rigid/
0.34 ... 1.5 mm
flexible)
Rated insulation voltage U = 250 V
i
Rated impulse withstand voltage
ES508E U = 4 kV
imp
ES502E U = 2.5 kV
imp
Utilization category of switching element acc. to IEC 60947-5-1
ES502E AC-12 250 V
ES502E/ES508E AC-15 230 V
DC-13 24 V
Min. switching current
at DC 24 V ES508E
at DC 12 V ES502E
Conventional thermal current I
th
ES502E 8 A
ES508E 10 A
Short circuit protection acc. to IEC 60269-1 (control circuit fuse)
ES502E 8 A gG
ES508E 10 A gG
Conditional short-circuit current 100 A
Reliability values according to EN ISO 13849-1
for switching elements ES508E
B 2 x 10
7
10d
5
ES502E
Value
ES508E
30x10
6
300 min
-1
Illustration: switching element not actuated
50 min
-1
Figure 1: Switching elements and terminal
assignment
≥ 20 N
≥ 15 N
0.8 mm
2
8 A
6 A
6 A
10 mA
10 mA
22 21
14 13
22 21