Procedure For Removing The Trays; Modifying The Tray Number - FAS FASTER GCD Manual Del Usuario

FASTER GCD – Issue 03
fig. 4
fig. 5
fig. 6
FAS INTERNATIONAL S.p.A. Via Lago di Vico, 60 SCHIO (VI) – tel. +39 0445 502011 – fax +39 0445 502010 - e-mail: info@fas.it
10.3 PROCEDURE FOR
TRAYS
To replace the tray proceed as follows:
•
Switch off the machine by means of the main
switch and pull out the power plug.
•
Open the main door.
•
Remove the electric connector -A- .
•
Pull out the tray by overcoming the resistance
exerted by the positioning spring (pull gently).
•
Pull the tray until it hits the stop, pull it
upwards, rotate it downwards until it is
released from the guide, then finally remove it
from the machine.
To mount a tray proceed as follows:
•
Insert the tray.
•
Push the tray until it engages in the locked
position.
•
Insert the electric connector -A-.
•
Close the main door.
•
Energise the machine by means of the main
switch.

10.4 MODIFYING THE TRAY NUMBER

Vending machines with
transformed into machines with 7 trays by
proceeding as follows:
•
Switch off the machine by means of the main
switch and pull out the power plug.
•
Pull out all the trays from the vending
machine.
•
Move the guides det. B (the last one on the
bottom is already in the correct position
consequently it does not need to be moved).
To move the guides, open the fastener, ref.
C, and then turn the guide to remove it and
position it at the desired height.
•
Move the connectors, det. A, placed on the
bottom of the cabinet.
•
Add a pair of guides.
•
Mount 7 trays and check that the connectors
are plugged in correctly.
•
Set the new prices.
41
REMOVING THE
6 trays can be
E
N
G
L
I
S
H