Important Information About Reducing The Electromagnetic Interferences; Environment; Specifications; Accessories, Spare Parts - Nosiboo Pro Manual Del Usuario

8. Important information about reducing electromagnetic interferences
The home wireless network equipment, mobile phones and wireless phones may affect the operation of medical equipment, as electro-
magnetic interference can occur between devices. Electromagnetic interference may cause harmful interference in the operation of
medical devices and therefore emergency situations may occur.
Due to the above mentioned reasons, medical devices must not interfere with any other equipment.
To guarantee the electromagnetic compatibility, the necessary requirements were fixed in standards. The standards define the protection
level of the medical device and the maximum value of the electromagnetic radiation emitted by these.
The Nosiboo Pro nasal aspirator complies with the requirements of EN 60601-1-2:2007. In spite of that, you should follow the instructions
below while using the device:
Do not use your cell phone or wireless phone or any other device emitting strong electromagnetic radiation near the device!
*
Otherwise, the device may malfunction which can cause an emergency.
It is recommended to keep at least 5 m distance between the devices! Check the proper operation of the device if this distance is shorter!
*

9. Environment

Do not dispose of the device at the end of the product life with household waste because electronic
products qualify as hazardous waste. This is indicated by the following sign on the product packaging:
The Colibri head does not present a serious risk to the environment so it can be disposed of as household waste.

10. Specifications

Adjustable motor performance: 200-390 W
Differential pressure: 0.04-0.08 bar
Max. air flow: 54 l/min
Power supply: 230 V, 50-60 Hz
IP class: IP21
Protection class: II
Type of applied parts: BF
Applied parts: the complete housing
Operation type: no continuous operation
Operation length: on 15 min/appr. off 50 min
Duration of continuous use: max 15 min.
Tripping temperature of the thermal switch: 95 °C

11. Accessories, spare parts

Parts can be ordered from the Specialist service station:
Attract Kft.
H-7622 Pécs, Siklósi út 1/1 - Hungary
Tel.: +36 72 551 642 (Mo-Fr: 8 am – 4 pm)
E-mail: customerservice@nosiboo.com
User manual * DMR-07/A05/1/V10 * 01. 03. 2021 * Nosiboo Pro * Page: 16/128
Average housing temperature: 30-35 °C after 1 min continuous use
Noise level: 55–62 dB
Temperature range: -10 °C... +40 °C
Relative humidity: max. 75%
Expected life of the housing (electrical parts): 3 years
Expected life of the Colibri head: 3 months
Diameter of the nasal insertion end of the Colibri head: min. 5.6 mm
Length of the nasal insertion end of the Colibri head: min. 32 mm
Weight (housing): 972 g
Dimensions (housing, W x H x D): 200 x 155 x 175 mm
Dimensions (complete package): 189 x 189 x 190 mm
Nosiboo Pro Accessory Set:
Accessory pack consisting of Nosiboo Pro spare parts
ACS-01-01; ACS-01-02; ACS-01-03
https://shop.nosiboo.eu/