Safety Instructions; Safe Working Habits - Facom 711B Manual De Instrucciones

Safety Instructions

This digital multi-meter has been designed according to
International Electro Safety Standard EN 61010-1,
EN 61010-2-030, EN 61010-2-033 concerning safety
requirements for electronic measuring instruments and
hand-held digital multi-meters. It meets the requirements
for CAT lIl 600V of EN 61010-. EN 61010-2-030,
EN 61010-2-033 and grade 2 for pollution.
• Users should use the meter strictly according to the
provisions of this manual. Otherwise, the warranty for
the meter may become invalid.
• The warnings in the user manual are used to remind
users of possible danger or dangerous action.
• The notes in the user manual are used to remind
users of possible meter damage or condition or
action of measured object.

Safe Working Habits

To avoid possible electric shock or personal injury as
well as damage to the meter or measured objects,
please use the meter according to the following
procedures methods:
• Check the case before using the meter. Don't use the
meter with damaged case. Check to see if the case is
cracked or lacks plastic parts. Please pay special
attention to the joint insulating layer.
• Check to see if the test wire has insulation damage or
bare metal. Check test wire continuity. If the wire is
damaged, please replace it with a new one before
using the meter.
NU-711B_0618 7 langues.indd 21
21
22/06/2018 09:20:53