Presentation; Preliminary Instructions; Installation Precautions - Chauvin Arnoux STATOP 9601 Manual De Instrucciones

1. PRESENTATION

The STATOP 9601 or 9604 analogue controllers are characterised by remarkable simplicity
of use. The central rotary button is used to program the setpoint temperature. On both
instruments, a red «OUT» diode lights when this setpoint has not been reached.
On the STATOP 9604, a digital display permanently indicates the measured temperature.
The STATOP 9601 and 9604 are equipped with an integrated ASIC circuit, calibrated during
manufacture, which makes any subsequent recalibration unnecessary.

2. PRELIMINARY INSTRUCTIONS

2.1. INSTALLATION PRECAUTIONS

Temperature. Check that the environmental conditions do not diverge from those specified
in this User's Manual (limits of ambient temperature and relative humidity). Take care not to
exceed 50°C and install an air conditioning unit if there is a risk of exceeding this value.
Vibrations, shocks. It is necessary to place the instrument in a place protected from
excessive shocks and vibrations and, in a general way, to take all precautions to ensure its
mechanical protection.
Dust. In very dusty atmospheres or in agressive atmospheres (e.g. acid vapour), the
instrument must be placed in a box, an enclosure or even under light pressure by clean, dry
air or neutral gas.
Electric and magnetic fields. In order to avoid the harmful effects of certain power units,
distance the instrument from power contacts, static relays with triacs and thyristors, motors
and all relays.
17