Operation; Manual Operation - Klarstein Blanca Manual Del Usuario

EN
22

OPERATION

Manual operation

The On/Off switch is must be switched to ‚I' to begin operating the fire.Operation is via
by the buttons located on the left hand side of the fire under the canopy. The fire will
beep to indicate that it is powered up.
• Turn on the appliance by pressing the power switch on the main unit.
• To activate the Aame effect, press the Flame button. The indicator light will
illuminate, this can be activated without the heater operating.
Press 1x: low brightness
Press 2x or 3x: Increase brightness
Press 4x: Deactivate flame effect again
• The fan heater has two separate settings that are selected by pressing each function
button:
Button 1: 1000 W
Button 2: 2000 W
• To turn the heater off press the function button again and set the power switch to 0.
Remote control
Power Button
Flame Button
Arrow Buttons
Heating Level
Button
Timer On / Off
Press the button to turn the
appliance On and Off.
Press the button to cycle
between the three flame
effects.
Use the buttons to change the
desired room temperature.
The temperature currently
selected will be displayed.
Press the button to change
between the available
heating levels.
Press the button to turn the
timer On/Off.