Swing-N-Slide PB 8232 Instrucciones De Montaje página 18

PineBluff Assembly Instructions
Slide Installation.
1. Install Slide centered in the provided opening as
shown in (Fig. 12).
2. Attach Stake to end of slide as shown in (12a).
Fig. 12a
(2)
1-1/4'' screws
per joint
2'' x 4'' x 17-1/4''
1-1/4'' Wood Screw
Fig. 13
Metal
Strap
Anchor-It
Anchor-It
Anchor-It Installation.
nstructions for Anchoring Swing•N•Slide Activity Centers
I
5/16'' Flat
1. Determine the final location of your activity center.
Washer
2. Place the Anchor-It stakes adjacent to the base and near the corners of your activity
center (at the bottom of the legs on swing sets) and twist the auger-style stakes into
the ground until only the loop is exposed.
3. Place the metal strap through the loop of the Anchor-It stake and secure it to the unit
with a lag screw and washer as illustrated to the right. Note: Attach the strap to the
unit with as little play as possible using whatever holes in the strap that work best.
1-1/2"
Lag Bolt
1'' Truss Screw
Use truss head screws to
to secure slide to deck.
18
Fig. 12