Swing-N-Slide PB 8232 Instrucciones De Montaje página 19

Fig. 14
Plastic-coated
end.
Fig. 15
Swing Seat Assembly
1. Take one length of chain and place the outermost link of chain through the Quick Link as shown in (Fig. 14).
2. Place the Quick Link through the Grommet of the swing seat as shown in (Fig. 15).
3. Tighten the threaded sleeve of the Quick Link with a suitably sized wrench so that the seat is securely attached and
the Quick Link cannot be easily loosened. (Fig. 16) Repeat for second chain, Quick Link and Swing Seat Grommet.
4. Hang the chains from the nylon bushing swing hangers. Crimp the hook opening closed with a pliers to secure the
chains to the swing hangers (Fig. 17). Make sure all connections are tightly crimped and secure before using swing
seats.
PineBluff Assembly Instructions
Fig. 16
19
Fig. 17