Fein GRIT GX 75 Instrucciones De Uso página 13

GX75.book Seite 13 Freitag, 15. Juni 2007 9:43 09
Caution! Danger of fire! When grinding metals, red
hot metal and grinding belt particles develop and
are collected in the dust collector.
Pay attention that persons are not harmed by
sparking.
The workpiece must always lie securely on the
grinding rest and the stop. Workpieces that are
too small or too thin may not be worked.
Never touch the running grinding belt.
Press the emergency-off switch immediately in
danger situations.
Clean the ventilation slots of the machine regu-
larly. The motor fan draws dust into the housing.
The mains plug of the machine may be mounted
only by a qualified electrician.
Pull out the mains plug for maintenance and
repair!
Have the electrical safety of the machine checked
regularly in accordance with statutory regula-
tions.
Check the rotation direction of the motor before
starting the operation of the machine for the first
time.
Make sure that you or other persons are not
standing directly next to the grinding belt when
switching the machine on.
At a glance.
1 Tension lever, undercarriage
2 Bolt
3 Undercarriage
4 Protective cover, top
5 Belt tension lever
6 Star-knob bolt for protective cover
7 Stop
8 Spark guard wing bolts
9 Spark guard
10 Grinding rest
11 Dust collector
12 Star-knob bolt for grinding rest
13 Adjustment screw for face- grinding rest
14 Star-knob bolt for adjusting the tracking of the
grinding belt
15 Emergency OFF pushbutton
16 Ventilation slots
17 On/Off switch
18 Speed switch (only for 2H models)
19 Contact wheel
20 Face- grinding rest
21 Drive wheel
22 Screw for side cover
23 Side cover
24 Connection sleeve for dust extraction
25 Instruction label
Intended use of the machine.
Mounting instructions.
EN