Network Connection - ITS EKSELANS RCT 2 Manual Del Usuario

EN
when enabled, the screen will display the time at which the device is in standby mode.
Information:
displays information about the model, video, hardware version, software version, date
or firmware.
Original factory default settings:
restoring default settings, channel lists and all settings are deleted.

NETWORK CONNECTION:

Network Configuration:
*Network selection: Internet connections can be selected via Wi-Fi and LAN.
Support for compatible dongle adapter: 7601 chipset (integrated circuit).
*Configuration: configure the Wi-Fi password or LAN connection.
Network applications
*Check the meteorological conditions of different countries.
UPDATING VIA USB
(only when the USB drive is connected):
Update software via USB.
1. Set [update mode] to [all codes].
2. Select the update file on the USB drive.
3. Select [Start].
4. A software update confirmation will appear: press [Yes] to confirm the update or
press [No] to cancel.
Important! Do not turn off the device if the update is not yet complete, as this could
damage the device!
Do not use modified or specific software for other models, as this could damage the
device.
5. When the update is complete, the device will restart automatically.