Shipping Information; Safety Information, 120-Volt Models; Additional Safety Informaton For Telecommunications Equipment - Oki D22820A Información Sobre Seguridad, Garantía, Y Regulaciones

Mutagenicity: Not available.
Names of Toxicologically Synergistic Products: Not
available.
Reactivity Data
Stability: Stable.
Materials to Avoid: None.
Polymerization: Will not occur.
Hazardous Decomposition or Byproducts: None.
Incompatibility: None.
Preventive Measures
Personal Protective Equipment
Respiratory Protection: None.
Protective Gloves: Not normally required. Desirable in
some cases.
Eye Protection: Not applicable.
Engineering Controls
Ventilation: Not applicable.
Other Protective Equipment and/or Hygienic
Practices: Not applicable.
Spill Cleanup
If ribbon is inadvertently released, it should be rewound.
Waste Disposal
Follow appropriate federal, state and local regulations.
Precautions
Precautions for Handling: Keep out of reach of children.
Precautions for Storage: Store in a cool, dark place.
Other Precautions: None.

Shipping Information

Special Shipping Information: Non hazardous.
UN Number: Not applicable.
Hazards Class: None.
User's Responsibility
This bulletin cannot cover all possible situations which the
user may experience when using this product. Each aspect
of your operation must be examined in regard to if, or
where, additional precautions may be necessary. All health
and safety information contained in this bulletin must be
provided to your employees or customers. It is your
responsibility to use this information to develop appropriate
work practice guidelines and employee instructional
programs for your operation.
Preparation Date of MSDS
Date: October 20, 2013.
Prepared by:
Oki Data Americas, Inc.
Engineering Services Department
2000 Bishops Gate Blvd.
Mt. Laurel, NJ 08054-4620
Tel: (856) 235-2600
Fax: (856) 222-5320
my.okidata.com

Safety Information, 120-Volt Models

For all countries / regions
Your OKI product has been carefully designed to give you
years of safe, reliable performance. As with all electrical
equipment, there are a few basic precautions you should
take to avoid hurting yourself or damaging the product.
• Carefully read the provided setup and operating
instructions.
• Save all provided documentation for future reference.
• Read and follow all warning and instruction labels on the
product itself.
• The printhead can get quite hot when it has been printing
for a length of time. Do not touch the printhead until it has
had a chance to cool off.
• Unplug the product before you clean it. Use only a damp
cloth; do not use liquid or aerosol cleaners.
• Place your product on a firm, solid surface. If you put it on
something unsteady, it may fall and be damaged. If you
place it on a soft surface, such as a rug, sofa, or cushion,
the vents may be blocked, causing the product to
overheat.
• Protect your product from overheating. Make sure no
obstructions block the openings of the product. Do not put
the product on or near a heat source (such as a radiator or
heat register). Keep the product out of direct sunlight.
• Always use this product in a well ventilated area. Allow
enough room around the product for adequate ventilation
and easy access to the paper trays. If you put the product
in any kind of enclosure, make sure the enclosure is well
ventilated.
• Do not use your product near water. Do not spill liquid of
any kind into it.
• Be certain that your power source matches the rating
listed on the back of the product. If you are not sure,
check with your dealer or with your local power company.
• Do not connect this product to an uninterruptible power
supply (UPS). For further information please contact Oki
Data at 1-800-OKI-DATA.
• Your product has a grounded, three-prong plug as a safety
feature. This plug only fits into a grounded outlet. If the
plug does not fit, the outlet may be an older,
non-grounded type. Contact an electrician to have the
outlet replaced. Do not use an adapter to defeat the
grounding.
• Install the product near an easily accessed power outlet.
• Avoid damaging the power cord. Do not put anything on it
or place it where it will be walked on. If the cord becomes
damaged or frayed, replace it immediately.
• If you are using an extension cord or power strip with the
product, make sure that the total of the amperes required
by all the equipment on the extension is less than the
extension's rating. The total ratings of all equipment
plugged into the outlet should not exceed 15 amperes.
• Do not poke anything into the ventilation slots of the
product. You could get an electrical shock or cause
hazardous electrical arcing, which could cause a fire.
• Aside from the routine maintenance described in the
documentation, do not try to service the product yourself.
Removing the cover may expose you to shocks or other
hazards.
• Do not make any adjustments other than those outlined in
the documentation. You may cause damage that will
require extensive repair work. The provided
documentation explains how to get your product serviced
by qualified Oki Data technicians.
If anything happens that indicates that your product is not
working properly or has been damaged, unplug it
immediately and follow the procedures in the provided
documentation for having your product serviced.
Here are some of the things to look for.
• The power cord or plug is frayed or damaged.
• Liquid has been spilled into the product, or the product
has been exposed to water.
• The product has been dropped, or the cabinet is damaged.
• The product does not function normally when you are
following the operating instructions.
Additional Safety Informaton for
Telecommunications Equipment
When using your telephone equipment, basic safety
precautions should always be followed to reduce the risk of
7 - English