Dyna-Glo DGB515SDP Manual De Instrucciones página 11

ASSEMBLY INSTRUCTIONS
9. Assemble the grill body assembly (C) onto the
cart assembly with four M6x16 bolts (DD).
Hardware Used
DD M6x16 Bolt
10. Pre-assemble two M6x16 bolts (DD) onto the
grill body assembly (C) and do not tighten them
and make sure to leave a 5mm gap between
the bolt and grill body's end cap. Then hang
the left side table assembly (J) on the bolts
and fasten the left side table assembly (J) with
three M6x16 bolts (DD) and tighten all bolts.
Hardware Used
DD M6x16 Bolt
9
x 4
10
DD
5mm
x 5
11
C
J
DD
C