Disposal Of Batteries - Bissell POWERLIFTER 2482 Serie Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Disposal of Batteries

WARNING
This product contains lithium-ion rechargeable batteries. According to Federal
and State regulations, removal and proper disposal of lithium-ion batteries is
required. For removal of the batteries in your PowerLifter® Ion Pet, see instructions
on this page.
NOTICE
Disconnecting the battery will destroy the appliance and invalidate the warranty.
1
Ensure the unit is
disconnected from the
charger and powered
OFF. Remove the Dirt
Tank from the unit.
4
Using a flat-head
screwdriver, pry off the
cover and remove it.
7
Disconnect and remove entire battery assembly by
unplugging the two sockets (one red, one white) from
the vacuum.
NOTE: Keep Battery Pack together – DO NOT separate individual batteries. For specific
disposal instructions of batteries, please contact the RBRC (Rechargeable Battery
Recycling Corporation) at 1-800-822-8837 or visit www.call2recycle.org.
2
Using a flat-head
screwdriver, pry off top
cover of handle and
remove it.
5
Using a Phllips-head
screwdriver, remove
7 screws
3
Using a Phillips-head
screwdriver, remove the
four screws below.
6
Pull two halves of
vacuum apart.
8
Discard remainder of
product.
www.BISSELL.com
13

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Tabla de contenido