Wireless Networks - Mediacom SMARTPAD Guía De Usuario

Wireless networks

Prior to starting an Internet-application, activate Wi-Fi connection and set
up Wi-Fi network.
1. Touch the icon "Applications" > "Settings" > "Wireless connections".
Select Wi-Fi item and set the switch to On position.
2. The device will automatically start searching for available networks
and will display them on the right panel.
3. Select any network from the list and press "Connect". If the network
you selected is protected by WEP-protocol, type the security key, then
press "Connect" button.
When the connection is successfully created, "Connected to" (Network
name) message will appear on the screen.
3G networks (Optional)
Note that your Tablet PC will only have signal if you are in an area covered
by your 3G provider's 3G or EDGE network.
Before inserting a SIM card, you must turn off the device.
A Pin number may be requested. Enter the SIM card pin number.
Your device will attempt to connect to the 3G network of your provider.
NOTE: If your device does not connect to your 3G provider's network
1. Contact your 3G provider to obtain the connection parameters.
2. On your device, tap the Menu icon, then settings.
3. Select Wireless & networks > Mobile networks > Select your operator.
In Access Point Names, select the correct access point name and enter the
exact connection parameters.
Bluetooth (Optional)
Tap "Settings" > Select "Wireless connections/Bluetooth" > Tap "On" to
switch on the Bluetooth function. The device will automatically search for
available Bluetooth device.
Select the Bluetooth device and start data transmission.
5