Installing The Camera; Completing Installation - Ezviz ezCube Serie Guía Inicio Rápida

3. Changing the default password
After adding the camera, you are required to change the device password to ensure
your video security. The password is used for the Image Encryption. If you turn on
the Image Encryption, you are required to input your password when you live view or
play back the camera.
- Go to the camera settings screen to change the default password.
- Tap on "Change Password".
- Tap on "Edit".
- Enter the original verification code located on the bottom of the camera.
- Enter the new password. Please use letters and numbers between 6 to 12
characters.
Installation
Step 1 Installing the Metal Plate (Optional)
Pick a clean and flat surface and secure the metal plate to the desired position with the foam
stickers or screws (not included).
There's a magnet piece inside the camera. You can skip this step if the surface is made
of metal.
Step 2

Installing the Camera

Secure the camera magnetically to the metal plate or metal surface (see figure below).
Step 3

Completing Installation

Adjust the camera angle as required.
Foam Sticker
Metal Plate
2