How To Install Your Remote Control; Maintenance; Blade Cleaning - Fanimation The Embrace 44 Manual Del Propietário

How to Install Your Remote Control (Option #1)
1. Unthread two screws from the wall switch plate.
(Figure 1)
2. Install the control bracket with two #6-32x 3/4" screws.
Push the four plastic plugs in to cover the screw holes.
(Included in the control packaging). (Figure 2)
How to Install Your Remote Control (Option #2)
1. Unthread two screws from the wall switch plate.
(Figure 1)
2. Install the control bracket with two #6-32x 1" screws.
Push the four plastic plugs in to cover the screw holes.
(Included in the control packaging). (Figure 2)
How to Install Your Remote Control (Option #3)
1. Drill the two 1/4" holes in wall and use the M6 plastic
anchor pushed into the holes. Install the control bracket
with two #3- 1" self tap screws. Push the four plastic plugs
in to cover the screw holes. (Included in the control
packaging). (Figure 1)
Periodic cleaning of your new ceiling fan is the only
maintenance that is needed.
When cleaning, use only a soft brush or lint free cloth to
Abrasive cleaning agents are not required and should be
Periodic light dusting of the blades is recommended.
A feather duster will work best.

Maintenance

Do not use water when cleaning your ceiling fan. It
could damage the motor or the finish and create the
possibility of electrical shock.

Blade Cleaning

Avoid using water, cleansers, or harsh rags, which
can
12
Figure 1
Figure 1
Figure 1
CAUTION
Figure 2
Figure 2