How To Assemble Your Ceiling Fan; How To Assemble The Ceiling Fan Blade - Fanimation The Embrace 44 Manual Del Propietário

1. Assemble the motor assembly to ceiling bracket
assembly using the previously removed hex nuts and
flat washers and securely tighten all hex nuts. (Figure 1)
2. Assemble the housing to ceiling bracket assembly
using the previously removed screws and securely tighten
all screws. (Figure 2)
How to Assemble the Ceiling Fan Blades
1.
Position the blade over the blade holder with
threaded posts showing. Make sure the bottom edge
of the blade is fully seated against the blade holder.
With a phillips screwdriver, tighten 3/16 -24 x 14 mm
washer head screws and fiber washers to secure the
blade to the blade holder. (Figure 1)
CAUTION
Do not connect fan blades until the fan is completely
installed. Installing the fan with blades assembled
may result in damage to the fan blades.

How to Assemble Your Ceiling Fan

Motor
Assembly
Blade Holder
HARDWARE USED:
3/16 -24 x 14 mm
WASHER HEAD
SCREWS
FIBER WASHER
9
Ceiling Bracket
Assembly
Figure 1
Ceiling Bracket
Assembly
Housing
Figure 2
3/16 -24 x 14 mm
Washer Head Screws
and Fiber Washer (3 each per blade)
BLADE
Figure 1
x 9
x 9