GHP Group OFW316RA Manual Del Usario página 4

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents above. If any part is missing or damaged, do not attempt to
assemble the product. Contact customer service for replacement parts.
Estimated Assembly Time: 15 minutes
Tools Required for Assembly: Phillips Screwdriver (Not Included) and Wrench (Included)
ASSEMBLY INSTRUCTIONS
1. Insert M8x35mm threaded end of the pegs
(DD) into the prethreaded holes by hand in the
fire bowl (C) until threads are tight.
Hardware Used
M8x35mm
DD
Threaded Peg
2. Attach ash catcher (D) to fire bowl (C) by
inserting M5 bolts (AA) from inside the fire bowl
EE
and secure with M5 nuts (BB) from underneath.
Secure with wrench (EE) and Phillips
Screwdriver.
Hardware Used
M5 Bolt
AA
BB M5 Nut
EE Wrench
EE
1
x 4
C
2
AA
x 3
x 3
C
x 1
D
4
DD
BB