Magnat CS 10 Notas Importantes Sobre La Instalación / Certificado De Garantía página 18

•
The screen will navigate to the setting page automatically. If not, Please open the web browser and
enter 172.19.42.1 in the address bar of the browser then press ENTER to confirm.
The web interface of the WLAN will appear.
•
Enter a name for the speaker by which you will be able to identify it in the list of available speakers
(e.g. "lounge" or "kitchen").
•
Search in the list of available networks in the "network name" drop-down menu and select the
network to which you want to connect the speaker.
•
If the network router does not assign IP addresses, switch the DHCP function off here and then enter
the IP address manually in the bottom boxes.
•
Then enter the network key, if required, and click on "CONNECT".
•
The web page will inform you "network was connected successfully". The product will now establish
a connection with the network
Note:
1. The product does not support "WEP" security protocol.
2. The smart device might navigate to a valid network after setting up the connection between speaker
and router. If not, please make sure the smart device connect to the same network as the speaker
connected to.
The product can now play back audio signals from the network. The connection data are saved therefore
they do not need to be re-entered the next time it is switched on.
18