Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
FIXED LENGTH EXTENSION COLUMN
IMPORTANT ! : The following procedure assumes that
the ceiling plate/adapter (not included) has been properly
installed following instructions provided with ceiling plate/
adapter.
NOTE:
Intended for use with Chief accessories and mounts.
1.
Install 1-1/2" NPT threaded column (A) into plate/adapter
(See Figure 1). Securely tighten column.
•
Ensure column (A) engages four full threads into
plate/adapter.
2
A
Figure 1
2.
Secure column (A) by tightening set screw in plate/adapter
(See Figure 1).
NOTE:
Hex key and set screw provided with plate/adapter.
WARNING:
Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer's responsibility to make sure the combined weight of
all components attached to the ELPMBC02/ELPMBC03/
ELPMBC04 columns do not exceed 500 lbs (226 kg).
•
The weight capacity of the ELPMBC02/ELPMBC03/
ELPMBC04 columns may be LIMITED to the lowest
weight capacity of any other component or accessory
used within the mounting system.
3.
Install and secure projector/display mount (not included) to
lower end of column (A) following instructions included with
mount.
2
ADJUSTABLE LENGTH EXTENSION
COLUMN
IMPORTANT ! : The following procedure assumes that
the ceiling plate/adapter (not included) has been properly
installed following instructions provided with ceiling plate/
adapter.
NOTE:
1.
Install 1-1/2" NPT threaded column (A or B, as applicable)
into plate/adapter (See Figure 2). Securely tighten column.
•
2
1
2.
Secure column (A or B, as applicable) by tightening set
screw in plate/adapter (See Figure 2).
NOTE:
3.
Install mating column (A or B, as applicable) (See Figure 2).
Installation Instructions
Intended for use with Chief accessories and mounts.
Ensure column (A or B, as applicable) engages four full
threads into plate/adapter.
B
A
Figure 2
Hex key and set screw provided with plate/adapter.
1
3
Publicidad
Tabla de contenido
