Important; Height Adjustment; Recline Adjustment - Evenflo Modern Manual De Usario

ASSEMBLE THE HIGH CHAIR
7
M
O
N
P
8
M
9
U
4
Turn the high chair right side up, as shown
Holding the restraint straps out of the way, install the seat
back at an angle so that one recline post
M
first recline notch on the seat base
O P
so that the recline post on the other side of the seat is placed
into the corresponding notch.
Align the seat back hinges with the hinges on the seat
Q
base P , as shown.
Your seat is now in the most upright position.
Q
R
S
To secure the seat back to the seat base, insert the recline
M
pin R fully in the hinge on the back of the seat, as shown.
IMPORTANT: Make sure you push the head of the recline pin
past the plastic locking tab to lock the pin in place .
S
T
Insert the crotch strap T through the bottom of the seat
pad U , as shown.
10
goes into the
N
. Lower the seat back
B
Push the bottom of the seat pad
of the seat until it snaps into place.
U
B Place one foot on the front base
adjuster buttons
or lower the high chair to one of six positions until it clicks
into position.
Pull up on the chair to make sure it is locked into position.
A
A
• NEVER adjust the seat back while baby is in the high chair.
• ALWAYS use high chair in fully reclined position with
children who are not capable of sitting upright unassisted.
• ENSURE both recline posts are in the same notches on
both sides.
Squeeze the handle
D
C
bars C
lock the seat back into position.
IMPORTANT: The seat back MUST be locked into position
before placing the baby in the high chair.
ASSEMBLE THE HIGH CHAIR
onto the bottom
U

HEIGHT ADJUSTMENT

WARNING
To avoid injury, DO NOT adjust seat height while
the baby is in the high chair.
A . Squeeze the height
on each side of the high chair and raise
B

RECLINE ADJUSTMENT

WARNING
A on the seat back B and insert the seat
into one of three notches D . Release the handle to
5