Accessories (Optional); Warranty Declaration; Technical Specifications - STEINEL PROFESSIONAL NM 5000-3 COM1 Manual Del Usuario

7. Accessories (optional)

User remote control RC5 EAN 4007841 592806
Additional functions, RC5
– Light ON/OFF 4 h
– User reset
– 100 h burn in, 4 h light ON press for ≥ 5 s
Service remote control RC8 EAN 4007841 559410
Additional functions, RC8
– Time setting, CH1
– Test / normal mode
– Twilight setting
– Night-time operation
– Daylight operation
– Teach-IN
– Reset
Smart Remote EAN 4007841 009151
– Control via smartphone or tablet
– Replaces remote controls RC5 and RC8
– Download the appropriate app and connect via Bluetooth
– Identify the sensors and read parameters
Additional functions, Smart Remote
– Light-level setting: teach, 2 - 1000 lux
– Burn in: 100 h
– Initial state; behaviour after applying the light ON/OFF supply voltage
– Eco mode: OFF, ON in the morning, OFF in the morning
– Eco mode duration: 2 h - 10 h
– Sensor
Detailed descriptions are provided in the operating instructions for the particular remote
control.

8. Warranty Declaration

As purchaser, you are entitled to your statutory rights against the vendor. If these
rights exist in your country, they are neither curtailed nor restricted by our Warranty
Declaration. We guarantee that your STEINEL Professional sensor product will remain
in perfect condition and proper working order for a period of 5 years. We guarantee
that this product is free from material-, manufacturing- and design flaws. In addition,
we guarantee that all electronic components and cables function in the proper man-
ner and that all materials used and their surfaces are without defects.
24
Making Claims
If you wish to make a claim, please send your product complete and carriage paid
with the original receipt of purchase, which must show the date of purchase and
product designation, either to your retailer or contact us at STEINEL (UK) Limited,
25 Manasty Road, Axis Park, Orton Southgate, Peterborough, PE2 6UP, for a re-
turns number. For this reason, we recommend that you keep your receipt of purchase
in a safe place until the warranty period expires. STEINEL shall assume no liability for
the costs or risks involved in returning a product.
For information on making claims under the terms of the warranty, please go to
www.steinel-professional.de/garantie
If you have a warranty claim or would like to ask any question
regarding your product, you are welcome to call us at any time
on our Service Hotline 01733 366700.

9. Technical specifications

Dimensions Surface-mounted installation, round
(L × W × H) Surface-mounted installation, square 95 × 95 × 41.5 mm
Concealed installation, round
Concealed installation, square
Output
Incandescent lamps, max. 2000 W at 230 V AC
Fluorescent tube, max. 1000 W
at cos j = 0.5, inductive load at 230 V AC
8 × max 58 W each, C ≤ 176 µF
at 230 V AC
220 - 240 V, 50 / 60 Hz max. 2.5 mm
Mains power supply
diffuse
Angle of coverage
Photo diode
Sensor technology
2-1000 lux + teach mode
Twilight setting
selectable (4 h)
Manual override
(permanent light)
IP rating Surface-mounted: IP54 Concealed: IP20
Temperature range -20°C to +50°C
*
Fluorescent lamps, low-energy lamps, LED lights with electronic ballast (total capacity of all ballasts
connected below the level stated).
Ø 126 × 56 mm
Ø 124 × 51 mm
94 × 94 × 51 mm
*
2
25