Cleaning And Care - Blumfeldt Ocean Planet 10033275 Manual Del Usuario

CLEANING AND CARE

Pump: lf, after a period of time, the pump starts to lose power or stops working
check for the build up of sediment, scale or dirt in the filter. Remove the pump
cover and the impeller cover. Clean them and the filter by fresh water.
Solar panel: The panel should be cleaned periodically with a soft tissue.
Regular cleaning of the panel is advised to maintain optimum conversion of the
sun's energy into direct current.
TROUBLESHOOTING
Pump does not operate even thought the solar module is in full sunlight.
• No connection to the solar module – check connection to the solar module.
• Impeller is blocked – To clean the pump, remove the front plate and the
impeller. Use a small brush or steam of water to remove any debris.
Pump does operate but there is no water running through the
fountainhead.
• Check for the build up of sediment or scale in the tubes or the filter- clean
the tubes and the filter.
Cover Filter
Impeller
Front plate
EN
13