Brandson 303247 Manual De Usuario página 22

9. Troubleshooting
Problem
The appliance is
no longer working
properly
The charging LED is
not glowing
The vacuum cleaner
is not vacuuming
properly
Dust is coming out of
the vacuum cleaner
The vacuum cleaner
does not work proper-
ly when the accesso-
ries are attached
22
Solution
• The batteries could be empty. Charge the appliance
on the charging station.
• Check the charging station and the charging pro-
cess. The station has to be connected to the power
socket and the status LED should glow.
• Ensure that the vacuum cleaner is turned off during
the charging process. Otherwise, it will not be
charged properly.
• Check whether the charging station is properly con-
nected to the socket and the mains plug is appropri-
ately connected to the charging station.
• The dust collector has to be properly installed.
Otherwise the vacuuming capacity is severely
restricted.
• The dust collector is full. Empty the dust collector.
• The filter unit is clogged. Clean the filter of the
vacuum cleaner.
• The dust collector has to be properly installed.
Otherwise the dust collector is not sealed properly
and dust may come out.
• The dust collector is full. Empty the dust collector.
• Check whether the filter and the filter unit are
properly installed.
• The dust collector is full. Empty the dust collector.
• The relevant accessory is clogged, clean it.
• Check whether the filter and the filter unit are
properly installed.
English