Dyna-Glo DGG424CNP Manual Del Usario página 16

ASSEMBLY INSTRUCTIONS
19. Open the left door assembly (T) and the
right door assembly (V). Place LP gas cylinder
(sold separately) into the nesting hole located
on the cart bottom shelf assembly (P). Rotate
the LP gas cylinder until the hose/regulator
coupling aligns with the threaded valve of the
cylinder. Hand tighten the hose/regulator
coupling to the threaded valve of the LP gas
cylinder.
Tighten the tank screw clockwise
front of the cart until the LP gas cylinder is
secured in place inside the nesting hole of the
cart bottom shelf assembly (P)
Fully Assembled
19
in the
Screw
16
Tank LP Gas
Cylinder