Safety Instructions - Eldom ride DA34 Manual De Usario

SAFETY INSTRUCTIONS

• Before first use familiarise with the whole instruction manual
• Before plugging in make sure tally plate data are compliant
to mains parameters. The iron can be operated with either of
two power supply voltage systems: 115 V and 230 V. Before
connecting the device to the mains, make sure that the switch
(8) is in the position indicating the power supply voltage of
your network.
• Plug the device in the socket with earthing
• Before plugging in and unplugging position the temperature
dial on "min"
• The appliance should be unplugged by pulling the plug not
the cable
• Before storing the iron wait until cools down completely
and empty the water tank. For storing period you may wrap
loosely the cord around the heel rest. Too tight wrapping may
damage the cord.
• Store in safe place, in vertical position to prevent the remaining
water leaking from steam vents and damaging the soleplate
• Keep the cord away from heat sources
• Before filling the water tank unplug the iron
• Do not leave without supervision when working
• Contact with hot metal surfaces as well as the steam may
result in burning. Be careful while ironing.
• The device can be used by children aged 8 and older and by
persons with limited physical, sensory or mental capabilities,
or persons without sufficient experience and knowledge
only under supervision or if previously instructed on the safe
use of the appliance and the possible risks. Children shall
not play with the appliance. Cleaning and maintenance that
are theresponsibility of the user shall not be carried out by
•
EN 7