Parkside PASD 4 A1 Traducción Del Manual De Instrucciones Original página 87

Noise and vibration data
The measured values have been determined in accordance with
EN 62841. The A-rated noise level of the power tool is typically:
Sound pressure level
Sound power level
Uncertainty K
Vibration values (vector total of three directions) determined in
accordance with EN 62841:
Screws
Vibration emission value
Uncertainty
NOTE
► The vibration emission values and the noise emission values
given in these instructions have been measured in accord-
ance with a standardised test procedure and can be used for
comparing one power tool with another.
► The specified total vibration values and the noise emission
values can also be used to make a provisional load estimate.
WARNING!
► Depending on the manner in which the power tool is being
used, and in particular the kind of workpiece being worked,
the vibration and noise emission values can deviate from
the values given in these instructions during actual use of the
power tool.
│ GB │ MT
■ 84
L = 67.8 dB (A)
pA
L = 78.8 dB (A)
WA
K = 3 dB
pA/WA
a = 0.79 m/s
h
K = 1.5 m/s
2
2
PASD 4 A1