Marmitek Speaker Anywhere 200 Manual Del Usuario página 5

Speaker receivers
1
6
5
4
3
2
7
1. Battery Compartment
2. Normal/Bass Boost
3. Auto Tuning
4. Power (red) / Stereo (green) LED
5. Volume ON/OFF button
6. Power connection (DC IN)
7. L/M/R selector (Left/Mono/Right)
1. The speakers are dual power:
a. With batteries
Insert 6 pieces 'AA' size ALKALINE battery into the battery compartment with correct
polarity. For using the batteries, make sure the Power adapter is not connected.
b. With supplied power adapter
Connect the 12V power adapter to the Power connection (DC IN) on the rear of each
speaker, then plug it to the electrical wall outlet.
Note: batteries will not be charged by the speaker.
2. Switch on the speakers by turning up the VOLUME ON / OFF button towards ON direction.
The POWER / STEREO LED will light up. Switch off the speakers by turning down the
VOLUME ON/OFF button towards OFF direction until a "click" sound is heard.
SPEAKER ANYWHERE 200™
5