Basic Functions - Daga cálido confort Instrucciones De Uso

BASIC FUNCTIONS

This pad includes a new generation of controls from the DAGA-TRA-
DITIONAL innovative line with a range of additional functions such
as:
• Temperature selector: 4 levels, 1 being the lowest and 4 the highest
temperature level.
• Automatic temperature reduction: This function allows the control to
regulate the pad use time and temperature parameters for their gra-
dual and automatic control. This enables the pad to operate uninte-
rrupted for 90 minutes at high temperatures (position 3 and 4) after
which the temperature is automatically reduced, with level 1 lighting
up on the screen.
If you wish to deactivate this function, press the central key to allow
you to once again select the higher temperature.
• Automatic safety stop or Autostop: In order to minimise the risk posed
to the user from inadvertently leaving the heating pad on for a long
period of time, this series includes a special safety automatic stop
feature, which actives after the device has been left on for 8 conti-
nuous hours if the control key has not been activated. The automatic
stop time will go back to the start every time the central key is pres-
sed. After activating this Autostop feature, the pad will remain turned
off and inoperative with the control screen indicates the reason with
a flashing red LED displaying the previous temperature level used.
If you wish to deactivate this function, press the central key to allow
you to once again select the desired temperature.
• Comfort program (only available in models L, L2): press the "comfort"
key once in order to activate this option (as indicated in the diagram
of the four- key control with the letter "E"). This function activates
the pad operation, according to the pre-set program.
Comfort, including the control itself. The program automatically va-
ries the temperature over 90 minutes, with the Comfort and tempe-
rature program remaining lit up at all times.
After this time, the control automatically turns off the heating pad.
If you wish to deactivate this function while the program is running,
press the " " key again, which will allow you to select the desired
temperature and operation time again.
INSTRUCTIONS FOR USE
Prior to connecting the pad to the mains, check your power supply
voltage to ensure it is the same as the one indicated on the label in-
cluded on the product.
Select the ON position indicated with the "I" symbol located on the
side sliding button on the control in order to turn on the device. Wait
until the automatic start check is completed, which will finish when
15
Manual Almohadillas I.indb 15 23/07/14 10:07