Background Operations; Time-Out Timer (Tot); Battery Saver; Battery Power Indicator - Kenwood TK-2312 Manual De Instrucciones

TIME-OUT TIMER (TOT)

The Time-out Timer prevents you from using a channel for an
extended duration. If you continuously transmit for a preset
time, the transceiver will stop transmitting and an alert tone will
sound. Release the PTT switch.

BATTERY SAVER

When activated by your dealer, the Battery Saver function
decreases the amount of power used after no signal is present
and no operations are being performed for 5 seconds. When a
signal is received or an operation is performed, Battery Saver
turns off.
Note: While the Battery Saver is operating, the LED may flash
green when receiving a QT/DQT signal which does not match the
transceiver QT/DQT setting.

BATTERY POWER INDICATOR

The battery power indicator displays the battery power
remaining, as illustrated below.
High
When the battery power is very low, replace or recharge the
battery pack. If activated by your dealer, an alert tone will
sound every 30 seconds and the LED indicator will blink red
when the battery power is low while transmitting.

SIGNAL STRENGTH INDICATOR

The signal strength indicator displays the strength of received
calls, as illustrated below.
Strong

BACKGROUND OPERATIONS

Sufficient
Medium
Low
Weak
Very Low
(flashing)
Very Weak
25