15.2 Causes and rectification of faults
The following table assists in localizing and rectifying minor faults.
Error
The selected program will not
start.
The turntable turns jerkily.
Food is not sufficiently
defrosted, warmed up or
cooked after preset time has
elapsed.
The device functions but the
cooking chamber lighting
does not work.
Abnormal noises can be
heard during operation of
microwave.
The time in the display field is
not correct.
► If you are unable to solve the problem with the steps shown above, please
contact Customer Service.
16 Disposal of the Old Device
Old electric and electronic devices frequently still contain valuable materials.
However, they also contain damaging substances, which were necessary for their functionality
and safety. If these were put in the non-recyclable waste or were handled incorrectly, they
could be detrimental to human health and the environment. Therefore, do not put your old
device into the non-recyclable waste under any circumstances.
Please note
► Utilise the collection point, established in your town, to return and recycle old electric and
electronic devices. If necessary, contact your town hall, local refuse collection service or
your dealer for information.
► Ensure that your old device is stored safely away from children until it is taken away.
caso SMG20
Possible cause
Device door is not closed
Power plug is not plugged in
Fuse is not activated
Dirt between the turntable and
the base of cooking camber
Dirt on rolling ring
Cooking vessel too large
Incorrectly selected time or
power level
Defective cooking chamber
light.
Food is covered with
aluminium foil
The cookware contains metal
and sparks are being created
within the cooking chamber
Power failure
Attention
Action
Close device door
Plug in mains plug!
Activate fuse
Remove dirt
Use different cooking
vessel
Re-set time and power level
Repeat process
Have Service dept repair
cooking chamber light.
Remove aluminium foil
Observe information on
cookware!
Re-set time
68