Lavatory
Brace Slot
3. Install the Lavatory
CAUTION: Risk of personal injury or product damage. Cast
iron lavatories are very heavy. Get help lifting the lavatory into
place.
CAUTION: Risk of personal injury or product damage. You
must install this lavatory to either a poured concrete wall or a
stud wall reinforced exactly as described in the "Prepare the
Site" section of this instruction.
Install the faucet and drain to the lavatory according to the
manufacturer's instructions.
Wall-Mount Bracket Installations
With help, carefully lift the lavatory onto the bolt shanks. Start
the washers and nuts on the bolt shanks. Level the lavatory, then
securely wrench tighten the nuts.
Table or Pedestal Installations
Move the assembled table or pedestal (sold separately) into
position. Refer to the installation instructions included with the
table or pedestal.
With help, carefully lift the lavatory onto the table or pedestal so
the slots in the lavatory brace fit over the bolt shanks. Start the
washers and nuts on the bolt shanks, but do not tighten securely
at this time.
Make sure the lavatory is level. Adjust the table or pedestal
levelers as needed.
1018372-2-B
Nut
Washer
Bolt Shank
Level
Lavatory
Pedestal
Leveler
6
Kohler Co.