FILLING THE WATER TANK
For the correct use of the rowing machine, the water tank must be filled up to
the halfway point (Calibration Level). This requires about 17 liters of water.
For filling, we recommend the use of tap water, as this contains additives
that inhibit algae. Distilled water does not contain these and therefore it
deteriorates faster.
If you want to train harder, simply row faster. To simulate the boat's weight,
use the resistance controller (see "Setting Resistance").
Attention: Before you start filling the tank, please check that the drain
plug on the bottom of the tank is in the correct position so that water that
is filled in does not directly leak out.
EN
17