Ega Master 58921 Manual De Instrucciones página 7

CONNECT TOOL AND PROGRAMMER
Battery Charging Settings:
Step 1: Plug AC 9V/1A connector for battery charging.
Step 2: Programmer will start to be charged and it will be stopped automatically when the
battery is full.
Please always remove the battery pack before using programmer to adjust.
Angle Type USB connect
Step 1: Plug Mini USB connector onto Programmer.
Step 2: Plug the other end of mini USB connector.
Pistol Type USB connect
Step 1: Plug Mini USB connector onto Programmer.
Step 2: Plug the other end of mini USB connector onto tool.
Step 3: Press ENTER to start setting.
7